Description
Wisefab V2 Ultimate chassis lock kit
The new S-Chassis lock kit 2.0 has all the benefits of 1.0 and more!
Requires OEM front subframe cutting and welding. It moves rack 46mm forward for better Ackemann curve and a bit lower for oil pan clearance. It works all big drift series rules that require OEM subframe usage, but allow modifications for rack relocation.
- More usable steering lock, feel and precise handling especially with rack relocation.
- Less sensitive steering. Increased steering ratio for smoother handling.
- More suspension travel – less interference risk at full droop. Long stroke coilover kits can be used.
- Lighter and stronger. Optimized design in combination with high strength steel is used.
- 60mm drop for roll centre correction.
- Adjustable camber and caster with adjustable double plates.
- Adjustable lock stopper.
- Adjustable Ackermann washers included in the kit.
Kit Includes:
- Adjustable coilover upper mounts, Formula Drift compliance.
- Knuckles with hardware.
- Lower control arms.
- Assembeled tie rods.
- Rack relocating kit.
- Rack installation guide.
- Installation guide.
Other Components, Packaging and Clearance:
- This kit assumes coilovers to have enough clearance.
- Dependent on rim width and ET, wider fenders or fender flares would be needed.
- With tire diameter up to 635mm (215/45R17, 225/45R17, 235/40R17, 225/40R18 etc) and lowered ride height the inner wheel wells need to be slightly modified.
- Recommended backspacing is 135-140mm (7“ ET45; 8“ ET35; 9“ ET25).If ET is smaller, then wheels stay more outwards, if ET is bigger, then spacers need to be used.
Reviews
There are no reviews yet.